216 Configuring User Encryption
320657-A
success: change accepted.
23x0# set ap 11 radio 2 radio-profile rp2 mode enable
success: change accepted.
23x0# show ap config
Port 5: AP model: AP-241, POE: enable, bias: high, name: AP05
boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11a, mode: enabled, channel: 36
tx pwr: 1, profile: rp2
auto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10
Port 11: AP model: AP-252, POE: enable, bias: high, name: AP11
boot-download-enable: YES
load balancing group: none
Radio 1: type: 802.11g, mode: enabled, channel: 6
tx pwr: 1, profile: rp2
auto-tune max-power: default, min-client-rate: 5.5, max-retransmissions: 10
Radio 2: type: 802.11a, mode: enabled, channel: 36
tx pwr: 1, profile: rp2
auto-tune max-power: default, min-client-rate: 24, max-retransmissions: 10
9 Save the configuration. Type the following command:
23x0# save config
success: configuration saved.
