A SERVICE OF

logo

Open as PDF
next previous
Configuring User Encryption 193
Nortel WLAN Security Switch 2300 Series Configuration Guide
Figure 2 shows the client support when the default encryption settings are used. A radio using the default encryption
settings encrypts traffic for non-WPA dynamic WEP clients but not for WPA clients or static WEP clients. The radio
disassociates from these other clients.
Figure 2. Default Encryption
This rest of this chapter describes the encryption types and how to configure them, and provides configuration scenarios.
Encryption settings:
-WPA disabled
-Dynamic WEP enabled
-Static WEP disabled
WLAN Security Switch
User D
TKIP
WPA
User C
Static WEP
Non-WPA
User B
Dynamic 40-bit WEP
WPA
User A
Dynamic WEP
Non-WPA
840-9502-0030