A SERVICE OF

logo

Open as PDF
next previous
302 Configuring RF Auto-Tuning
320657-A
Displaying RF Neighbors
To display the other radios that a specific Nortel radio can hear, use the following commands:
show auto-tune neighbors [ap AP-num [radio {1 | 2| all}]]
show auto-tune neighbors [dap dap-num [radio {1 | 2| all}]]
The list of radios includes beaconed third-party SSIDs, and both beaconed and unbeaconed Nortel SSIDs.
To display neighbor information for radio 1 on the directly connected AP access point on port 2, type the following
command:
23x0# show auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC RSSI
------- ----------------- ----
1 00:0b:85:06:e3:60 -46
1 00:0b:0e:00:0a:80 -78
1 00:0b:0e:00:d2:c0 -74
1 00:0b:85:06:dd:00 -50
1 00:0b:0e:00:05:c1 -72