A SERVICE OF

logo

Open as PDF
next previous
178 Configuring and Managing Mobility Domain Roaming
320657-A
Configuring Member WSSs on the Seed
To configure the list of members on the Mobility Domain seed for distribution to other member WSSs, use the following
command on the seed WSS:
set mobility-domain member ip-addr
For example, the following commands add two members with IP addresses 192.168.12.7 and 192.168.15.5 to a Mobility
Domain whose seed is the current WSS:
23x0# set mobility-domain member 192.168.12.7
success: change accepted.
23x0# set mobility-domain member 192.168.15.5
success: change accepted.
Each command adds a member identified by its IP address to the list of Mobility Domain members. If the WSS from
which you enter the command is not configured as a seed, the command is rejected.