Using the Command-Line Interface 41
Nortel WLAN Security Switch 2300 Series Configuration Guide
Port Lists
The physical Ethernet ports on a WSS can be set for connection to AP access points, authenticated wired users, or the
network backbone. You can include a single port or multiple ports in one WSS Software CLI command by using the
appropriate list format.
The ports on a WSS are numbered 1 through 22. No port 0 exists on the switch. You can include a single port or multiple
ports in a command that includes port port-list. Use one of the following formats for port-list:
• A single port number. For example:
23x0# set port enable 16
• A comma-separated list of port numbers, with no spaces. For example:
23x0# show port poe 1,2,4,13
• A hyphen-separated range of port numbers, with no spaces. For example:
23x0# reset port 12-16
• Any combination of single numbers, lists, and ranges. Hyphens take precedence over commas. For example:
23x0# show port status 1-3,14
