520 Managing System Files
320657-A
Displaying Boot Information
Boot information consists of the WSS Software version and the names of the system image file and configuration file
currently running on the WSS switch. The boot command also lists the system image and configuration file that will be
loaded after the next reboot. The currently running versions are listed in the Booted fields. The versions that will be used
after the next reboot are listed in the Configured fields.
To display boot information, type the following command:
23x0# show boot
Configured boot image: boot0:WSS020003.020
Configured boot configuration: file:newconfig
Booted version: 2.0.3
Booted image: boot1:WSS020101.020
Booted configuration: file:configuration
Product model: WSS-20
In this example, the switch is running software version 1.1.0. The switch used the WSS010100.020 image file in boot
partition boot1 and the configuration configuration file for the most recent reboot. The switch is set to use image file
WSS010101.020 in boot partition boot0 and configuration file newconfig for the next reboot.
(For additional information about the output, see the Nortel Mobility System Software Command Reference.)
Working with Files
The following section describe how to manage files stored on the WSS switch.
