A SERVICE OF

logo

Open as PDF
next previous
Appendix A: Troubleshooting a WS Switch 585
Nortel WLAN Security Switch 2300 Series Configuration Guide
Copying Trace Results to a Server
To copy the contents of the trace buffer to a file on a TFTP server, use the following command:
copy trace-buffer-name tftp://[destination-ip-addr | destination-hostname]/
destination-filename
To find the name of the trace buffer file, use the dir command.
For example, the following command copies the log messages in trace buffer 0000000001 to a TFTP server at IP address
192.168.253.11, in a file called log-file:
23x0# copy 0000000001 tftp://192.168.253.11/log-file
Clearing the Trace Log
To clear all messages from the trace log buffer, type the following command:
23x0# clear log trace
List of Trace Areas
To see all WSS Software areas you can trace, type the following command:
23x0# set trace ?