Xanté 3 Series Manual

A SERVICE OF

next previous

_______________________________________ Configuration 6-39

Fig. 6.17 Adjust the Print Density Dial

3. Close the Multipurpose Feeder.

Note: Check the print density dial when you replace a toner

cartridge. The setting required for the previous cartridge may

be too high or too low for the new cartridge.

Toner Page

The Toner Page feature automatically prints a toner reorder form

when the cartridge needs to be replaced. To order a new cartridge,

fill out the form and return it to XANTÉ or to your XANTÉ vendor.

If the feature is enabled and toner is low, the reorder form prints

every 250 pages.

Set Toner Page from the MISC: TONER PAGE configuration menu.

Yes, the factory default, enables this feature; No disables it.