11-4 Troubleshootingbb____________________________________
E:MOTOR There is a hardware problem with the
motor.
EXIT PAPER JAM A media jam has occurred after the
paper has been printed but before it has
been deposited in the output tray.
FRONT COVER OPEN The multipurpose feeder cover is open.
FRONT PAPER JAM A media jam has occurred caused by the
media not being pulled from the tray
properly.
FULL STACK The output tray is full.
FUSER COVER OPEN The fuser cover is not closed properly.
HOLDING The printer is offline and data is coming
across one (or more) of the interfaces.
The printer cannot receive the data when
it is offline.
INITIALIZING The printer is warming up and
performing setup routines.
LATE PAPER JAM A media jam has occurred caused by the
media not reaching the exit roller at the
correct time.
LOW PAPER The paper stack is low in the selected
cassette or optional 2,000 sheet feeder.
The message appears during each paper
feed when the paper stack is fewer than
approximately 25 pages.
LOW TONER Toner in the cartridge is low or needs to
be redistributed.
NO TONER CART The toner cartridge is either not in the
printer or not seated in place.
