Xanté 3 Series Manual

A SERVICE OF

next previous

_____________________________________ Macintosh Setup 3-29

1. Open XANTÉ Command Center; then, choose General:

Spooling. The Spooling window appears (fig. 3.11).

Fig. 3.11 Spooling Window

2. Select Devices from the Configure box. The Select Spool

Device window appears (fig. 3.12).

Fig. 3.12 Select Spool Device Window

3. Select the disk to use to store the spooled jobs or select NONE

to disable spooling; then, click Ok. The Spooling Window

reappears (fig. 3.11).