Filter
Top Products
3Com Switch 4200G Family 11
Command Reference
display igmp-snooping group
Use the display igmp-snooping group command to display information about the IP and MAC multicast
groups under one VLAN (with vlan vlan-id) or all VLANs (without vlan vlan-id).
Any view
display igmp-snooping statistics
Use the display igmp-snooping statistics command to display the message statistics about IGMP
Snooping.
Any view
display info-center
Use the display info-center command to display system log settings and memory buffer record statistics.
Any view
display interface
Use the display interface command to view the configuration information on the selected interface.
Any view
display interface VLAN-interface
Use the display interface vlan-interface command to display the information about the management
VLAN interface, including the physical and link status, the format of the sent frames, the MAC address, IP
address (and subnet mask), description string and MTU (maximum transmit unit) of the management VLAN.
Any view
display ip host
Use the display ip host command to display all host names and their corresponding IP addresses.
Any view
display ip interface vlan-interface
Use the display ip interface vlan-interface command to view information on the specified interface.
Any view
display ip routing-table
Use the display ip routing-table command to display the summary information about the routing table.
Any view
display ip routing-table acl
Use the display ip routing-table acl command to display the routes permitted by the specified basic
ACL.
Any view.
display ip routing-table ip-address
Use the display ip routing-table ip-address command to display the information about the routes
leading to the destination.
Any view
display ip routing-table ip-address1 ip-address2
Use the display ip routing-table ip-address1 ip-address2 command to display the information
about the routes with their destinations within the specified destination IP address range.
Any view
display ip routing-table ip-prefix
Use the display ip routing-table ip-prefix command to display the information about the routes
matching a specified IP prefix list.
Any view
display ip routing-table protocol
Use the display ip routing-table protocol command to display the information about specific routes.
Any view
display ip routing-table radix
Use the display ip routing-table radix command to view the route information in a hierarchical (tree)
structure.
Any view
display ip routing-table statistics
Use the display ip routing-table statistics command to display the statistics of a routing table.
Any view
display ip routing-table verbose
Use the display ip routing-table verbose command to display the detailed information about a routing
table.
Any view