Filter
Top Products
36 3Com Switch 4200G Family
Command Reference
snmp-agent trap queue-size
Use the snmp-agent trap queue-size command to configure the information queue length of a Trap packet
sent to the destination host.
System view
snmp-agent trap source
Use the snmp-agent trap source command to configure the source address for sending Trap messages.
System view
snmp-agent usm-user
Use the snmp-agent usm-user command to add a new community name or, if you use the V3 parameter,
a new user to an SNMP group.
System view
Web command: Administration -> SNMP -> Users
snmp-agent usm-user
Use the snmp-agent usm-user command to add a new user to an SNMP group. You can also optionally
use this command to apply an ACL to filter network management users.
System view
snmp-agent usm-user
Use the snmp-agent usm-user command to add a new user to an SNMP group.
System view
snmp-agent usm-user
Use the snmp-agent usm-user command to add a new community name or, if you use the V3 parameter,
a new user to an SNMP group.
System view
snmp-host
Use the snmp-host command to configure an SNMP host for the member devices inside a cluster on the
management device.
Cluster view
speed
Use the speed command to set the transmission speed of the user interface.
User Interface view
speed
Use the speed command to configure the port rate.
Ethernet Port view
Web command: Port -> Administration
ssh client assign rsa-key
Use the ssh client assign rsa-key command to specify on the client the public key for the server to be
connected to guarantee the client can be connected to a reliable server.
System view
ssh client first-time enable
Use the ssh client first-time enable command to configure the client to run the initial authentication.
System view
ssh server authentication-retries
Use the ssh server authentication-retries command to set authentication retry number for SSH
connections.
System view
ssh server timeout
Use the ssh server timeout command to set authentication timeout time for SSH connections.
System view
ssh user assign rsa-key
Use the ssh user assign rsa-key command to allocate public keys to SSH users.
System view
ssh user authentication-type
Use the ssh user authentication-type command to define on the server the available authentication type
for an SSH user.
System view
ssh user service-type
Use the ssh user service-type command to specify service type for a user.
System view