Filter
Top Products
8 3Com Switch 4200G Family
Command Reference
dir
Use the dir command to query specified files.
FTP Client view
dir
Use the dir command to display the files in the specified directory.
SFTP Client view
disconnect
Use the disconnect command to terminate a FTP connection without quitting FTP client view.
FTP Client view
display acl
Use the display acl command to view the detailed configuration information of an ACL, including each
rule and its number as well as the number and size in bytes of the data packets that match the statement.
Any view
display am user-bind
Use the display am command to view whether address management is enabled and to display IP address
pool configuration.
Any view
display arp
Use the display arp command to display the ARP mapping table entries by entry type, or by a specified
IP address.
Any view
display arp count
Use the display arp count command to display the number of the specified type of ARP mapping entries.
Any view
display arp timer aging
Use the display arp timer aging command to view the current setting of the dynamic ARP aging timer.
Any view
display boot-loader
Use the display boot-loader command to display the information about the app startup files of a switch,
including the current app startup file name, the main and backup app startup files to be used when the switch
starts the next time.
Any view
display boot-loader
Use the display boot-loader command to display the host software (.bin file) that will be adopted when
the switch reboots.
Any view
display bootp client
Use the display bootp client command to display BOOTP client-related information, including the MAC
address of the BOOTP client and the IP address obtained.
Any view
display brief interface
Use the display brief interface command to display the configuration information about one specific
or all ports in brief, including the port type, connection state, connection rate, duplex attribute, link type and
default VLAN ID.
Any view
display channel
Use the display channel command to display the details about the information channel.
Any view
display clock
Use the display clock command to display the current date and time of the system, so that you can adjust
them if they are wrong.
Any view
display cluster
Use the display cluster command to display the state and basic configuration information of the cluster
that contains the current switch.
Any view
display cluster base-topology
Use the display cluster topology command to display the standard topology view of the cluster.
Any view