Filter
Top Products
30 3Com Switch 4200G Family
Command Reference
qos cos-local-precedence-map
Use the qos cos-local-precedence-map command to configure the "COS->Local-precedence" mapping
relationship.
System view
qos dscp-cos-map
Use the qos dscp-cos-map command to configure the "COS->802.1p priority" mapping relationship.
System view
qos dscp-drop-precedence-map
Use the qos dscp-drop-precedence-map command to configure the "DSCP->Drop-precedence" mapping
relationship.
System view
qos dscp-dscp-map
Use the qos dscp-dscp-map command to configure the "DSCP->DSCP" mapping relationship.
System view
qos dscp-local-precedence-map
Use the qos dscp-local-precedence-map command to configure the "DSCP->Local-precedence"
mapping relationship.
System view
qos-profile
Use the qos-profile command to create a QoS profile and enter the corresponding view.
System view
qos-profile port-based
Use the qos-profile port-based command to configure the port-based application mode of QoS profiles
on ports.
Ethernet Port view
queue-scheduler
Use the queue-scheduler command to set the queue-scheduling algorithm and parameters.
System view
quit
Use the quit command to terminate the connection to the remote SSH server.
User view
quit
Use the quit command to terminate the connection to the remote SFTP server and exit to system view.
SFTP Client view
quit
Use the quit command to terminate FTP control connection and FTP data connection and quit to user view.
This command has the same effect as that of the bye command.
FTP Client view
quit
Use the quit command to return from current view to lower level view, or exit the system if current view is
user view.
Any view
radius nas-ip
Use the radius nas-ip command to set the source IP address used by the switch to send RADIUS packets.
System view
radius-scheme
Use the radius-scheme command to specify the RADIUS scheme to be used by the current ISP domain.
ISP Domain view
radius scheme
Use the radius scheme command to create a RADIUS scheme and enter its view.
System view
radius trap
Use the radius trap command to enable the switch to send trap messages when its RADIUS
authentication or accounting server turns down.
System view
reboot
Use the reboot command to restart an Ethernet switch.
User view
Web command: Administration -> Reboot