Filter
Top Products
3Com Switch 4200G Family 25
Command Reference
messenger
Use the messenger time command to enable or disable the messenger alert and configure the related
parameters.
ISP Domain view
mirroring group
Use the mirroring-group command to configure the port mirroring group.
System view
mirroring-group mirroring-port
Use the mirroring-group mirroring-port command to configure the monitored port.
System view
mirroring-group reflector-port
Use the mirroring-group reflector-port command to configure a reflector port.
System view
mirroring-group remote-probe vlan
Use the mirroring-group remote-probe vlan command to specify the remote-probe VLAN for a given
mirroring group.
System view
mirroring-port
Use the mirroring-port command to configure a mirroring port.
Ethernet Port view
Web command: Port -> Mirroring
mkdir
Use the mkdir command to create a directory on the remote SFTP server.
SFTP Client view
mkdir
Use the mkdir command to create a directory in a specified directory of a specified storage device.
User view
mkdir
Use the mkdir command to create a directory on the remote SFTP server.
FTP Client view
monitor-port
Use the monitor-port command to configure the destination monitor port.
Ethernet Port view
more
Use the more command to display the content of a specified file.
User view
move
Use the move command to move a file to a specified directory. You can also assign a new name for the file.
User view
name
Use the name command to set a name for the assigned VLAN.
VLAN view
name
Use the name command to set a name for the assigned VLAN.
VLAN view
nas-ip
Use the nas-ip command to set the source IP address used by the switch to send RADIUS packets.
RADIUS Scheme view
ndp enable
Use the ndp enable command in system view to enable NDP globally on the switch. When being executed
in Ethernet port view, this command enables NDP for an Ethernet port.
System view
Ethernet Port view
ndp timer aging
Use the ndp timer aging command to set how long a device will hold the NDP packets received from the
local device. After the aging timer expires, the device will discard the received NDP neighbor node
information.
System view