Filter
Top Products
3Com Switch 4200G Family 29
Command Reference
primary authentication
Use the primary authentication command to configure the IP address and port number for the primary
RADIUS authentication/authorization server.
RADIUS Server Group view
priority
Use the priority command to set the priority of Ethernet port.
Ethernet Port view
priority trust
Use the priority trust command to configure the precedence mapping mode on the port of the switch.
Ethernet Port view
protocol inbound
Use the protocol inbound command to configure the protocols supported in the current user interface.
VTY User Interface view
protocol inbound
Use the protocol inbound command to specify the protocols supported by the user interface.
User Interface view
protocol-priority protocol-type
Use the protocol-priority command to set the global traffic priority that applies to a given protocol.
System view
protocol-vlan
Use the protocol-vlan command to specify a VLAN is a specified type of protocol-based VLAN.
VLAN view
public-key-code begin
Use the public-key-code begin command to enter public key edit view and input the client public key.
Public Key view
public-key-code begin
Use the public-key-code begin command to enter public key edit view and set server public keys.
Public Key view
public-key-code end
Use the public-key-code end command to return from public key edit view to public key view and save the
public keys you set.
Public Key Edit view
public-key-code end
Use the public-key-code end command to return from public key edit view to public key view and save the
public keys you set.
Public Key Edit view
put
Use the put command to upload a local file to the remote SFTP server.
SFTP Client view
put
Use the put command to upload a local file to the remote FTP server.
FTP Client view
pwd
Use the pwd command to display the current directory on the SFTP server.
SFTP Client view
pwd
Use the pwd command to display the current path. If the current path is not configured, an error occurs when
you execute this command.
User view
pwd
Use the pwd command to display the current directory on the remote FTP Server.
FTP Client view
qos cos-drop-precedence-map
Use the qos cos-drop-precedence-map command to configure the "COS->Drop-precedence" mapping
relationship.
System view
qos cos-dscp-map
Use the qos cos-dscp-map command to configure the "COS->DSCP" mapping relationship.
System view