3Com 10014917 Switch User Manual


 
3Com Switch 4200G Family 39
Command Reference
stp port priority
Use the stp port priority command to set the priority of the current port in a specified spanning tree
instance.
Ethernet Port view
stp priority
Use the stp priority command to set the priority of a switch in a spanning tree instance.
System view
stp region-configuration
Use the stp region-configuration command to enter MST region view.
System view
stp root primary
Use the stp root primary command to configure the current switch to be the root bridge of a specified
spanning tree instance.
System view
stp root-protection
Use the stp root-protection command to enable the root protection function for the current port.
Ethernet Port view
stp root secondary
Use the stp root secondary command to configure the current switch as a secondary root bridge of a
specified spanning tree instance.
System view
stp tc-protection
Use the stp tc-protection command to enable or disable the TC-BPDU attack prevention function for
the switch.
System view
stp timer-factor
Use the stp timer-factor command to set the timeout time of a switch in terms of the multiple of the Hello
time.
System view
stp timer forward-delay
Use the stp timer forward-delay command to set the Forward delay for a switch.
System view
stp timer hello
Use the stp timer hello command to set the Hello time for a switch.
System view
stp timer max-age
Use the stp timer max-age command to set the maximum age of a switch.
System view
stp transmit-limit
Use the stp transmit-limit command to set the maximum number of configuration BPDUs the current
port can transmit within a Hello time.
Ethernet Port view
super
Use the super command to switch the current user level to the one identified by the level argument.
User view
super password
Use the super password command to set the password for users to switch to a higher user level.
System view
sysname
Use the sysname command to set a domain name for the switch.
System view
Web command: Administration -> SNMP -> Setup
sysname
Use the sysname command to set the system name of the Switch.
System view
system-view
Enter system-view to enter the system view from the user view.
User view