Filter
Top Products
6 3Com Switch 4200G Family
Command Reference
cluster-snmp-agent usm-user v3
Use the cluster-snmp-agent usm-user v3 command to add an account to the SNMPV3 group configured
for a cluster.
Cluster view
cluster switch-to
Use the cluster switch-to command to switch between the management device and member devices
for configuration and management.
User view
cluster switch-to sysname
Use the cluster switch-to sysname command to switch between the master device and a member
device.
User view
command-privilege level
Use the command-privilege level command to set the level of the specified command in a specified view.
System view
copy
Use the copy command to copy a file.
User view
copy configuration
Use the copy configuration command to copy the configuration of a specific port to other ports, to ensure
consistent configuration.
System view
cut connection
Use the cut connection command to cut the connection a user or a category of users by force.
System view
data-flow-format
Use the data-flow-format command to set the units of measure for the data flow sent to the RADIUS
Server.
RADIUS Scheme view
databits
Use the databits command to set the databits for the user interface.
User Interface view
debugging
Use the debugging command to enable the system debugging.
User view
debugging
Use the debugging command to enable the system debugging.
User view
debugging arp packet
Use the debugging arp packet command to enable ARP debugging.
User view
debugging dhcp client
Use the debugging dhcp client command to enable debugging for the DHCP client/BOOTP client.
User view
debugging dhcp-relay
Use the debugging dhcp-relay command to enable DHCP relay debugging.
User view
debugging DLDP
Use the debugging dldp command to enable specific debugging for DLDP on all ports with DLDP enabled.
User view
debugging ntp-service
Use the debugging ntp-service command to debug different NTP (network time protocol) services.
User view
debugging radius
Use the debugging radius command to enable the debugging for RADIUS protocol.
User view
debugging snmp-agent
Use the debugging snmp-agent command to enable SNMP Agent debugging.
User view