Filter
Top Products
ACTIVE_WKA The LECS address table is to contain an ATM address to be
substituted to the well known address (WKA). There can be only one
ACTIVE_WKA entry in the LECS table. The ATM address you specify
will be the one selected to be substituted with the WKA (WKA active).
If an ACTIVE_WKA entry already exists in the LECS address table, it
will no longer be used as the WKA substitution address. If the
ACTIVE_WKA option is used, the latest LECS address entry
configured with ACTIVE_WKA is used to route the LECS setup to the
LECS WKA.
INACTIVE_WKA The LECS address table is to contain an ATM address which must not
be substituted for the well known address.
atm_address The ATM address of an ATM Forum compliant LAN Emulation
Configuration Server.
Note: Any LECS ATM address configured by this command (either with ACTIVE_WKA
or INTACTIVE_WKA) is stored in the ILMI MIB 'atmSrvcATMAddress' fields and so may
be returned to LECs issuing get ILMI commands on 'atmSrvcATMAddress' fields.
5-24 ONcore ATM Switch/Control Module: Installation and User's Guide