Filter
Top Products
Using TCP/IP V2.0 for OS/2 V3 (WARP)
1. Configure the SLIP connection using the TCPIPCFG icon then SLIP.
2. Enable the SLIP interface on the correct COMM port.
3. Keep VJ compression off and use 1000 as MTU size.
4. Configure the local and remote IP addresses.
5. The mask is not required.
6. Configure FTFP server using TCPIPCFG icon thru
AUTOSTART
. This is required
in the FTFP server for 6416SW download and upload operations.
7. Set terminal speed with the mode com1 command.
8. PING the IP address of the remote 6416SW.
Using ChameleonNFS V4.0 or V4.1 for Windows
1. Configure the SLIP connection using the Custom icon under ChameleonNFS
2. Select COM1 and no flow control PORT option
3. Do not select a modem under the Modem option
4. Configure the local and remote IP addresses
5. The mask is not required.
6. Enter the appropriate hostname in the services/host table.
7. Use the TELNET icon under ChameleonNFS to connect to terminal dialog via
VT220 emulation.
4-11