Filter
Top Products
Status: Not in Service (SSI Port)
Steps to Take:
1. Use the command SHOW PORT slot.port VERBOSE command to determine the
problem.
2. There may be a problem of bandwidth availability on the module.
Spread the SSI ports over several modules.
If, after trying to solve the problem, the status of ATM media ports does not change to
OKAY, perform the Wrap test as described in the
ONcore Switching Hub/CELLplex 4000
ATM Command Reference Guide
. If you find that the module is faulty, replace it. For
assistance, contact your 3Com service representative.
7-18 ONcore ATM Switch/Control Module: Installation and User's Guide