Filter
Top Products
Setting the ATM Address of the 6416SW
A default ATM address is provided with the 6416SW. You can use this default address
only for a stand-alone (isolated) 6416SW. For all other 6416SW configurations, a new
ATM address must be defined. See “Defining the ATM Address of the 6416SW” on
page 3-7 for more information.
To set the ATM address for the 6416SW, you use the SET DEVICE ATM_ADDRESS
command:
ONcoreATM> set device atm_address [ENTER]
ONcoreATM>Enter ATM address: 39.11.FF.22.99.99.99.....1.49.11.11.11.11.
11.11.49 [ENTER]
The SET DEVICE ATM_ADDRESS command automatically saves the new address and
resets the ATM subsystem.
5-13