Filter
Top Products
Maintenance Codes
The following table explains the prompts that can be displayed in Maintenance Mode.
Table C-2. Maintenance Codes and Meanings
Code Meaning
>>0020>> The NVRAM diagnostics failed, the battery may be low.
>>0021>> Bad checksum, the loading or de-compression of the operational code
failed.
>>0023>> After 3 retries, the 6416SW FPGAs did not initialize properly.
>>0030>> The initialization or the diagnostics failed for the switch, the SPU
(Switch Processing Unit), or the serial link.
>>0031>> The ATM wrap test from the control-point board to the switch board
failed.
>>0032>>
>>0033>>
>>0034>>
The initialization of the operational code was halted due to insufficient
memory.
>>00BA>> Maintenance mode is running with the backup daemon.
C-5