Filter
Top Products
Setting the Internal Clock
You need to set the 6416SW's 24-hour internal clock only once, when you install the
6416SW. When you set the internal clock, you establish a starting time, date, and day.
To set the internal clock, enter the SET CLOCK command and specify the time and
date parameters. Then press Enter.
For example, the following command sets the internal clock to 4:44 p.m. on September
30, 1996:
ONcoreATM> set clock 16:44 1996/ 9/3 [ENTER]
The 6416SW internal clock uses its own battery and functions even when the 6416SW
fails to operate.
5-9