Filter
Top Products
Unpacking the Module
To unpack the 6416SW module, follow these steps:
1. Remove the 6416SW module from the shipping carton.
2. Remove the 6416SW module from the anti-static bag and inspect it for damage.
Always handle the module by the faceplate being careful not to touch the internal
components.
If the module appears damaged, put it back in the anti-static bag, and put the bag
back into the shipping carton. Then contact your local 3Com dealer or 3Com
representative.
3Com suggests that you keep the shipping carton and the anti-static shielding bag
which your 6416SW module was delivered in, in case you later want to repackage the
module for storage or shipment.
3Com also suggests that you record the serial number of your 6416SW module and
other information about the modules in your ONcore hub in the Hub Planning Chart
provided in your ONcore Switching Hub Reference Library.
2-2 ONcore ATM Switch/Control Module: Installation and User's Guide