Filter
Top Products
Before You Start
The following section describes keystrokes and the command syntax to use to enter
6416SW commands from a configuration console. For a complete description of all
6416SW configuration commands, see the
ONcore Switching Hub/CELLplex 4000 ATM
Command Reference Guide
.
Entering 6416SW Commands
By entering commands at the prompt on the 6416SW configuration console, you can
configure various functions of the 6416SW. The management prompt appears as
follows:
ONcoreATM>
6416SW commands are not case-sensitive. The system interprets ABC (uppercase) the
same as abc (lowercase).
The values you enter for certain command parameters are, however, case-sensitive
and must be typed exactly as shown in the
ONcore Switching Hub/CELLplex 4000 ATM
Command Reference Guide
. For example, if you enter RWTRAP and rwtrap for the
com_name parameter in two separate SET COMMUNITY commands, you will create two
different community names.
4-3