EUROPE – RESTRICTIONS FOR USE OF 5GHZ FREQUENCIES IN EUROPEAN COMMUNITY COUNTRIES
■ To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above
2.4GHz and 5GHz channel limitations apply. The user should check the current channel of operation. If
operation is occurring outside of the allowable frequencies as listed above, the user must cease operating
the 11a/b/g Wireless Workgroup Bridge at that location and consult the local technical support staff
responsible for the wireless network.
■ The 5GHz Turbo mode feature is not allowed for operation in any European Community country.
■ This device must not be operated in ad-hoc mode using channels in the 5GHz bands in the European
Community. Ad-hoc mode provides a direct communication between two client devices without a
Wireless LAN Access Point.
■ This device must be used with Access Points that have employed and activated a radar detection feature
required for European Community operation in the 5GHz bands. This device will operate under the control
of the Access Point in order to avoid operating on a channel occupied by any radar system in the area. The
presence of nearby radar operation may result in temporary interruption in communications of this device.
The Access Point’s radar detection feature will automatically restart operation on a channel free of radar.
You may consult with the local technical support staff responsible for the wireless network to ensure the
Access Point device(s) are properly configured for European Community operation.
European Community
Countries
5150-5250 MHz
Channels: 36, 40,
44, 48
Indoor Only
5250-5350 MHz
Channels: 52, 56,
60, 64
Indoor Only
5470-5725MHz
Channels: 100, 104,
108, 112, 116, 120,
124, 128, 132, 136, 140
Indoor/Outdoor
Austria
✔
X X
Belgium, France,
Switzerland,
Liechtenstein
✔ ✔ X
Denmark, Finland,
Germany, Greece,
Iceland, Ireland, Italy,
Luxembourg,
Netherlands, Norway,
Portugal, Spain, Sweden,
UK
✔ ✔ ✔
✔ allowed X not allowed