Aastra Telecom ATP-CNX-040-01 Switch User Manual


 
xiv ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
Safety warnings
General warnings
The following safety warnings apply:
Mechanical hazards and electrical shock hazards are possible if you remove one or more of the modules. There
are no operator-serviceable modules. Only qualified personnel should service this equipment.
This equipment must be connected to a protective ground according to the instructions in this manual. Improper
grounding may result in electrical shock.
This equipment does not provide safety isolation between any port that is connected to a digital network
termination point or any port to which terminal equipment is connected.
The wall circuit breaker provides the main protection for this equipment.
Ensure that rack installation does not result in airflow blockage to power supply vents or chassis vents.
Before installing the Aastra CNX rackmount version, ensure that the rack is sturdy and well-secured.
Lithium battery caution
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.
ATTENTION: Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec
une batterie du même type ou d’un type recommandé par le constructeur. Mettre au rebut les batteries usagées
conformément aux instructions du fabricant.
Compliances
The Aastra CNX is in compliance with regulations as follows:
Environmental
32-104° F (0-40° C)
Humidity 10-85% non-condensing
400 BTUs/hour
28 dBA maximum acoustic noise
Safety Certifications
cUL 950, NTRL/UL 1950, TUV EN 60 950
Telecom Approvals
FCC Part 68, Industry Canada, CTR4
•EMI/RF
FCC Part 15 Class A, EN55022 Class A (CISPR), EN55024