Filter
Top Products
Aastra CNX software
2-10 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
Conference capabilities
Each Aastra CNX supports 30 conference participants with up to 15 active
conferences (60-port unit supports 60 participants with up to 30 active
conferences; 120-port unit supports 120 participants with up to 60 active
conferences). Participants can connect by TDM, VoIP, or both.
The following table describes the type of Aastra CNX conferences and the
features associated with these conference types.
Conference
types
Description Conference type features
Permanent This type of conference is always available. It
uses ports from a pool dedicated for permanent
conferences.
You can use a permanent moderated bridge as
a personal bridge. Participants are put on hold
until the moderator joins and are disconnected
when the moderator leaves. The first person to
join activates the conference in this type of
bridge.
Note: Permanent conferences must be setup
by a system administrator.
Moderated and Unmoderated - A user(s)
is designated as a moderator(s). The
moderator uses a PIN that provides full
control over the conference. You can also
enable or disable a moderator as the
dominant speaker of the conference.
Note: The moderator PIN is different from
the conference participant’s PIN.
Scheduled This type of conference exists for a specific
duration and uses a reserved number of ports
for the conference. Scheduled conferences can
handle early arrivals and over-runs and do not
require moderators.
Scheduled conferences can also have multiple
recurrences of a conference.