Filter
Top Products
Startup and check the Aastra CNX
1-10 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
Illustration
Alarm Indicators
To check alarm indicators on the Aastra CNX:
Step Action
a Check that the Status LED is not ON Red. If the Status LED is ON Red, an alarm
condition exists in the unit. Contact your System Administrator.
Note: During bootup of the Aastra CNX, the Status LED is ON Red for 1 second.
This is a normal condition at bootup.
b When the T1/E1 port(s) are enabled, check that the T1/E1 LEDs on the bottom
row are OFF. If the T1/E1 LED(s) on the bottom row are ON Amber, a yellow
alarm is present on the T1/E1 link. If the T1/E1 LEDs are ON Red, a Red alarm is
present on the T1/E1 link. Contact your System Administrator.
POWER
STATUS
ALARM
ACTIVE
1
10/100 ENET
T1 / E1
2
1
2
3
4