Filter
Top Products
Connect to the console
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 1-5
Aastra CNX Installation and Setup Procedures
Connect to the console
Console port parameters
You can access the Aastra CNX console locally or remotely. Ensure that you
configure your terminal or PC (terminal emulator) console port parameters as
provided in the following table.
For the procedures in this section, refer to the illustration on page 1-6.
Local connection
Procedure
To connect a local PC or terminal:
Parameter Value
Baud rate 9600
Flow control None
Data bits 8
Stop bit 1
Parity None
Step Action
a Attach the 9-pin male DB-9 connector on the serial cable to the female console
port on the rear panel of the Aastra CNX.
b Attach the 9-pin female connector on the serial cable to the male console port on
the back of your PC or terminal.
3