Filter
Top Products
2-2
CheetahSwitch Workgroup-4508
Main Menu
With the system configuration program you can define system parameters,
manage the switch and all its ports, or monitor network conditions. The figure
below of the Main Menu and the following table briefly describe the selections
available from this program.
Note: Options for the currently selected item are displayed in the highlighted area at
the bottom of the interface screen.
CheetahSwitch Workgroup - 4508
Main Menu
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
System Restart Menu...
Exit
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
System Information Menu
System Information Provides basic system description, including contact information.
Switch Information Shows hardware/firmware version numbers, and power status.
Management Setup Menu
Network Configuration Includes IP setup, Ping facility, Access Host configuration, HTTP (Web
agent) setup, Telnet configuration, and MAC address.
Serial Port Configuration Sets communication parameters for the serial port, including
management mode, baud rate, console time-out, and screen data
refresh interval.
SNMP Configuration Enables/disables SNMP access, activates traps; and configures
communities and trap managers.
Console Login Configuration Sets user names and passwords for system access, as well as the
invalid password threshold and lockout time.
TFTP Download Downloads new version of firmware to update your system (in-band).
Device Control Menu
Port Configuration Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation or full duplex.