Filter
Top Products
3-24
CheetahSwitch Workgroup-4508
VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features.
Parameter Description
PVID The VLAN ID assigned to untagged frames received on this port. Use the
PVID to assign ports to the same untagged VLAN.
Acceptable Frame Type This switch accepts “All” frame types, including VLAN tagged or VLAN
untagged frames. Note that all VLAN untagged frames received on this port
are assigned to the PVID for this port.
Ingress Filtering If set to “True,” incoming frames for VLANs which do not include this port in
their member set will be discarded at the inbound port.
Note: This switch does not support GVRP. Therefore, the GVRP Status parameter is
set to disabled and cannot be enabled. The other GVRP parameters will always
display zeros.