Filter
Top Products
Management Guide
2-5
Displaying Version Information
Use the Switch Information screen to display hardware/firmware version numbers,
as well as the power status.
CheetahSwitch Workgroup - 4508
Switch Information
Hardware Version : V1.0
POST ROM Version : V01.00.00
Firmware Version : V01.00.01
Serial Number :
Port Number : 8
Internal Power Status :
Redundant Power Status :
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
Hardware Version Hardware version of the main board.
POST ROM Version Power-On Self-Test version number.
Firmware Version System firmware version in ROM.
Serial Number
1
Serial number of the main board.
Port Number Number of ports.
Internal Power Status
1
Indicates if the primary power is active or inactive.
Redundant Power Status
1
Indicates if the redundant power is active or inactive.
1: These parameters are not supported by the current hardware version.
Management Setup Menu
After initially logging onto the system, adjust the communication parameters for
your console to ensure a reliable connection (Console Configuration menu).
Specify the Ethernet and IP addresses for the SNMP agent (IP Configuration
menu), and then set the Administrator and User passwords (Console Login
Configuration menu). Remember to record them in a safe place. Also set the
community string which controls access to the on-board SNMP agent via in-band
management software (SNMP Configuration menu). The items provided by the
Management Setup Menu are described in the following sections.