Filter
Top Products
2-32
CheetahSwitch Workgroup-4508
For example, the following screen displays settings for VLAN 2, which includes
tagged ports 1-6, and forbidden port 8.
CheetahSwitch Workgroup - 4508
1Q VLAN Static Table Configuration
VID VLAN Name Row Status
------------------------------
2 RD Active
Egress Ports Forbidden Egress Ports
11111100 00000001
VID:2
[Show]
[More]
[New]
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
802.1Q VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q VLAN
features.
CheetahSwitch Workgroup - 4508
802.1Q VLAN Port Configuration : Port 1 - 8
Port PVID Acceptable Ingress GVRP GVRP Failed GVRP Last
Frame Type Filtering Status Registrations PDU Origin
------------------------------------------------------------------------------
1 1 All FALSE DISABLED 0 00-00-00-00-00-00
2 1 All FALSE DISABLED 0 00-00-00-00-00-00
3 1 All FALSE DISABLED 0 00-00-00-00-00-00
4 1 All FALSE DISABLED 0 00-00-00-00-00-00
5 1 All FALSE DISABLED 0 00-00-00-00-00-00
6 1 All FALSE DISABLED 0 00-00-00-00-00-00
7 1 All FALSE DISABLED 0 00-00-00-00-00-00
8 1 All FALSE DISABLED 0 00-00-00-00-00-00
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
PVID The VLAN ID assigned to untagged frames received on this port. Use the
PVID to assign ports to the same untagged VLAN.
Acceptable Frame This switch accepts “All” frame types, including
Type VLAN tagged or VLAN untagged frames. Note that all VLAN untagged
frames received on this port are assigned to the PVID for this port.
Ingress Filtering If set to “True,” incoming frames for VLANs which do not include this port in
their member set will be discarded at the inbound port.
Note: This switch does not support GVRP. Therefore, the GVRP Status parameter is set to disabled
and cannot be enabled. The other GVRP parameters will always display zeros.