Filter
Top Products
Management Guide
2-31
802.1Q VLAN Static Table Configuration
Use this screen to create a new VLAN or modify the settings for an existing
VLAN. Note that all ports can only belong to one untagged VLAN. This is set to
VLAN 1 by default, but can be changed via the 802.1Q VLAN Port Configuration
screen.
CheetahSwitch Workgroup - 4508
1Q VLAN Static Table Configuration
VID VLAN Name Status
------------------------------
Egress Ports Forbidden Egress Ports
VID:0
[Show]
[More]
[New]
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
VID The ID for the VLAN currently displayed.
Range: 1-2048
VLAN Name A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Status Sets the current editing status for this VLAN as:
Not in Service, Destroy, or Active.
Unit Stack unit.
Egress Ports Set the entry for any port in this field to “1” to add it to the displayed
VLAN, or “0” to remove it from the VLAN.
Forbidden Egress Ports Prevents a port from being automatically added to this VLAN via
GVRP. Note that GVRP is not supported by this switch.
[Show] Displays settings for the specified VLAN.
[More] Displays consecutively numbered VLANs.
[New] Sets up the screen for configuring a new VLAN.