Filter
Top Products
2-6
CheetahSwitch Workgroup-4508
CheetahSwitch Workgroup - 4508
Management Setup
Network Configuration ...
Serial Port Configuration ...
SNMP Configuration ...
Console Login Configuration ...
TFTP Download ...
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Changing the Network Configuration
Use the Network Configuration menu to set the bootup option, configure the
switch's Internet Protocol (IP) parameters, enable the on-board Web agent, or
enable Telnet access. The screen shown below is described in the following table.
CheetahSwitch Workgroup - 4508
Network Configuration
IP Configuration ...
IP Connectivity Test (Ping) ...
Access Host Configuration ...
HTTP Configuration ...
MAX Number of Allowed Telnet Sessions (1 –4) : 4
MAC Address : 00-00-e8-12-34-56
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter Description
IP Configuration Screen used to set the bootup option, or configure the switch’s IP
parameters for the Ethernet interface.
IP Connectivity Test (Ping) Screen used to test IP connectivity to a specified device.
Access Host Configuration Screen used to restrict access to the host switch to specified subnets.
HTTP Configuration Screen used to enable/disable the Web agent.
MAX Number of The maximum number of Telnet sessions allowed to simultaneously
Allowed Telnet Sessions access the SNMP agent. Up to four sessions are supported.
MAC Address Physical address of the SNMP agent.