Filter
Top Products
Management Guide
2-13
Parameter Description
IP Address IP address of the trap manager.
Community Name A community specified in the SNMP Communities table.
Status Sets administrative status of entry to enabled or disabled.
Console Login Configuration
Use the Management Setup: Console Login Configuration to restrict management
access based on specified user names and passwords, or to set the invalid
password threshold and timeout. There are two user types, Administrator and
Guest. Only the Administrator has write access for parameters governing the
SNMP agent. You should therefore assign a user name and password to the
Administrator as soon as possible, and store it in a safe place. (If for some
reason your password is lost, or you can not gain access to the System
Configuration Program, contact your Accton distributor for assistance.) The
parameters shown on this screen are indicated in the following figure and table.
CheetahSwitch Workgroup - 4508
Console Login Configuration
Password Threshold : 3
Lock-out Time (in seconds) : 0
User Type User Name Password
---------------------------------------
Admin : admin
Guest : guest
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Default Description
Password 3 Sets the password intrusion threshold which limits the number
Threshold of failed logon attempts.
(Range: 0~65535)
Lock-out Time 0 The time (in seconds) the management console will be
disabled due to an excessive number of failed logon attempts.
(Range: 0~65535)
Admin
1
name: admin Administrator has access privilege of Read/Write for all
password: null screens.
Guest
1
name: guest Guest has access privilege of Read Only for all screens.
password: null
1: Passwords can consist of up to 15 alphanumeric characters and are not case sensitive.