Filter
Top Products
3-4
CheetahSwitch Workgroup-4508
Main Menu
Using the on-board Web agent, you can define system parameters, manage and
control the switch and all its ports, or monitor network conditions. The figure to the
right of the Main Menu and the following table briefly describe the selections
available from this program.
Item Description
System Provides basic system description, including contact information.
Switch Shows hardware/firmware version numbers and power status.
IP Includes boot state, IP address, and Telnet session count.
SNMP Configures communities and trap managers; and activates traps.
Security Sets password for system access..
Upgrade Downloads new version of firmware to update your system.
Address Provides full address listing, sorted by address or port.
STA Enables Spanning Tree Algorithm; also sets parameters for switch priority,
hello time, maximum message age, and forward delay; as well as port
priority and path cost.
Port Enables any port and enables/disables flow control.
VLAN Assigns switch ports to form up to 16 independent LAN groups.
Analyzer Sets analysis and monitored port.
Statistics Displays statistics on network traffic passing through the selected port.
Broadcast Enables/disables broadcast suppression on a per-port basis. Also sets the
Storm Control broadcast-rate threshold above which broadcast packets are discarded.
Apply Implement the changes made to the current configuration menu.
Revert Cancel changes made to current configuration menu (prior to pressing Apply).
Help Help on using the Web management interface.