Filter
Top Products
Management Guide
3-5
System Information
Use the System Information screen to display descriptive information about the
switch, or for quick system identification as shown in the following figure and table.
Parameter Description
System Name
1
Name assigned to the switch system.
IP Address
2
IP address of the SNMP agent. The management agent supports SNMP over
UDP/IP transport protocol. In this environment, all systems on the Internet, such as
network interconnection devices and any PC accessing the agent module (or
running AccView) are assigned an IP address. Valid IP addresses consist of four
numbers, of 0 to 255, and separated by periods. Anything outside of this format
will not be accepted by the configuration program.
System Object ID MIB II object identifier for switch’s network management subsystem
Location
1
Specifies the area or location where the system resides.
Contact
1
Contact person for the system.
System Uptime Length of time the current management agent has been running.
1: Maximum string length is 255, but the screen only displays 45 characters. You can use the arrow keys to
browse the whole string.
2: The default value is null.