Filter
Top Products
2-8
CheetahSwitch Workgroup-4508
IP Connectivity Test (Ping)
Use the IP Connectivity Test to see if another site on the Internet can be
reached. The screen shown below is described in the following table.
CheetahSwitch Workgroup - 4508
Network Configuration: IP Connectivity Test (Ping)
IP Address : 200.123.211.109
Test Times : 1000 Interval : 1
Success : 1000 Failure : 0
[Start]
<OK>
Use <TAB> or arrow keys to move. other keys to make changes.
Parameter Description
IP Address IP address of the site you want to ping.
Test Times The number of ICMP echo requests to send to the specified site. (1~1000)
Interval The interval (in seconds) between pinging the specified site. (1~ 10 seconds)
Success/Failure The number of times the specified site has responded or not to pinging.
Access Host Configuration
Use the Access Host Configuration screen to restrict management access to the
host switch to specified subnets. The screen shown below is described in the
following table.
CheetahSwitch Workgroup - 4508
Security Configuration: Access Host Configuration
IP Address Match IP Mask
1. 10.1.10.0 255.255.255.0
2.
3.
4.
5.
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
IP Address Match IP address of a subnet that is allowed management access to the host
switch. Up to five subnets can be specified.
IP Mask The IP mask that identifies the subnet.