Filter
Top Products
Management Guide
3-21
VLAN Current Table
This screen shows the current port members of each VLAN and whether or not the
port supports VLAN tagging. Ports assigned to a large VLAN group that crosses
several switches should use VLAN tagging. However, if you just want to create a
small port-based VLAN for one or two switches, you can assign ports to the same
untagged VLAN. The current configuration is shown in the following screen.
Parameter Description
VLAN Entry Delete Count The number of times a VLAN entry has been deleted from this table.
VLAN ID The ID for the VLAN currently displayed.
Up Time at Creation The value of sysUpTime (System Up Time) when this VLAN was created.
Status Shows that this VLAN was added to the switch as a static entry.
Egress Ports Shows the ports which have been added to the displayed VLAN group.
Untagged Ports Shows the untagged VLAN port members.