Filter
Top Products
2-4 Installation
2.4. Installing External Options
2.4.1 Installing PCMCIA Options
The Notebook has two connector slots for PCMCIA option cards. These two slots can be used to
install one Type III or two Type I/II credit card size PCMCIA option cards. You can install a PCMCIA
(PC card) without turning the computer off.
Use the following procedure to install a PCMCIA option:
1. Review the installation instructions supplied with the PCMCIA option card(s).
2. Hold the card at the end opposite the connector pins with the label side up. Insert the card into
an unused slot on the left side of the Notebook.
3. If the option requires external cabling (e.g. Modem option), connect external cabling at this
time.
Note: After installation of a PCMCIA option card, Windows 95 displays the New Hardware Found
dialog box to help you configure the new device. To remove a card, click on the PCMCIA
icon; then, press the appropriate PC Card Release Button (or press both buttons for a
Type III device) and remove the option.
Figure 2-2 Installing PCMCIA Option Cards