Filter
Top Products
Chapter 2 33
The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings
.
Setting the Boot Drive Sequence
The Boot Drive Sequence section lists boot priorities (1st, 2nd, 3rd and 4rd ) for bootable drives in your
computer.
For example, the default value (1st: Floppy Disk, 2nd: CD-ROM, 3rd: Hard Disk) tells the computer to first
search for a bootable floppy disk in the floppy drive. If it finds one present, it boots up from that floppy disk. If
not, the computer continues to search for a bootable CD-ROM in the CD-ROM drive. If it cannot boot up from
the CD-ROM drive, it continues by booting up from the hard disk.
To set the boot drive sequence, use the
w
/
y
keys to select a priority level (1st, 2nd, 3rd and 4rd), then use
the
z
/
x
keys to select the device for that priority level.
Parameter Description Options
Boot Display Sets the display device on boot-up.
When set to
Auto
, the computer automatically
determines the display device when the computer
starts up. If an external display device (e.g., monitor)
is connected, it becomes the boot display; otherwise,
the computer’s display screen is the boot display.
When set to
Both
, the computer outputs to both the
computer display screen and an external display
device if one is connected.
Both
or Auto
Screen Expansion Expand the screen on the graphic/text mode.
When it is disabled, the graphic/text mode expansion
function is disabled and the graphic/text image will be
centralized on the LCD. If it is enabled, the graphic/
text image will be expanded to the full LCD screen.
Enabled
or Disabled
Resume on LAN/Modem Access
Enabled
or Disabled
Fast Boot Allows you to define your system’s booting process;
whether to skip some POST routines or proceed with
the normal booting process.
Disabled
or Ensabled
Boot on LAN If disable Boot from LAN, BIOS should remove “boot
drive sequence --> LANDesk Service Agent” item.
Disabled
or Enabled
CPU Power Management Mode CPU power management setting
Auto
or Disabled
Boot Drive Sequence Specifies the order in which the computer starts up
from. Please refer to below section.
1st: Floppy Disk
2nd: CD-ROM
3rd: Hard Disk
4rd: ---
Intel
R
SpeedStep
TM
Technology
There are three CPU speeds available for users to
specify the CPU speed.
Automatic
Maximum
Battery Optimized