Filter
Top Products
Chapter 3 61
Removing the LCD Bracket
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the LCD Module” on page 52
4.
See “Removing the LCD Bezel” on page 59
5.
Release the four screws as shown below.
6.
Take out the LCD panel from the LCD module carefully.
7.
Release the two screws on the left side of the LCD panel.
8.
Do the same for removing the two screws on the right side of the LCD panel.
9.
Remove the left and right LCD brackets.
Removing the LED Board
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the LCD Module” on page 52
4.
See “Removing the LCD Bezel” on page 59
5.
Remove the two screws as shown below.
6.
Disconnect the microphone cable.