Filter
Top Products
Chapter 3 57
Removing the Audio Jack Cover
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the CPU” on page 53
4.
See “Separating the Lower Case from the Upper Case” on page 55
5.
See “Removing the System Board” on page 56
6.
Remove the audio jack cover from the main board.
Removing the PCMCIA Socket
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the CPU” on page 53
4.
See “Separating the Lower Case from the Upper Case” on page 55
5.
See “Removing the System Board” on page 56
6.
From the back of the main board, release the four screws as shown below.
7.
Detach the PCMCIA socket from the main board.
Removing the Modem Power Cable
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the CPU” on page 53
4.
See “Separating the Lower Case from the Upper Case” on page 55
5.
See “Removing the System Board” on page 56
6.
Disconnect the modem power cable from the main board.
7.
Remove the cable.