Filter
Top Products
60 Chapter 3
Removing the Speaker Assembly Module
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the LCD Module” on page 52
4.
Turn the LCD module cover.
WARNING:
Be careful not to break the LCD panel. Place a soft cushion below the LCD panel.
5.
Remove the three mylars and the three screws from the speaker module.
6.
Remove the speaker to LED cable.
7.
Remove the speaker assembly module.
Removing the Inverter Board
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the LCD Module” on page 52
4.
See “Removing the Speaker Assembly Module” on page 60
5.
Remove the LCD power cable and inverter to LED cable from the inverter.
6.
Remove the two screws as shown below.
7.
Remove the inverter board.