Filter
Top Products
40 Chapter 2
The screen below appears if you select Multi Test.
Specify the desired number of tests and press
e
.
After you specify the number of tests to perform, the screen shows a list of test items (see below).
Move the highlight bar from one item to another. Press Space to enable or disable the item. Press
e
to view
the available options of each selected item. Press
|
to close the submenu.
The right corner screen information gives you the available function keys and the specified test number.
!
Space: Enables/disables the item
!
ESC: Exits the program
!
F1: Help
!
F2: Tests the selected item(s)
!
Enter: Opens the available options
!
Test Times: Indicates the number of tests to perform.
NOTE: The F1 and F2 keys function only after you finish configuring the Test option.
NOTE: When any errors are detected by diagnostic program, refer to “Index of PQA Diagnostic Error Code” for
troubleshooting.
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
Diag
One TEST
Multi TEST
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo
Option
Exit
Diag
ONE TEST
MULTI TEST
FULL TEST
QUICK TEST
TEST COUNT VALUE (1...9999) 1
PQA Vx_x xx-xx-xx
Diag Result
SysInfo
Option
Exit
Diag
MANUAL TEST
AUTO TEST
Test Items
[ ] System Board
[ ] Memory
[ ] Keyboard
[ ] Video
[ ] Parallel Port
[ ] Serial Port
[ ] Diskette Drive
[ ] Hard Disk
[ ] CD-ROM
[ ] Coprocessor
[ ] Pointing Dev.
[ ] Cache
SPACE: mark/unmark selecting item
ESC : return to upper menu
F2 : test the marked item(s)
ENTER: open sub-item’s menu
Test Times = 1
F1 : Help menu