Filter
Top Products
56 Chapter 3
Removing the DC-DC Charger Board
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the CPU” on page 53
4.
See “Separating the Lower Case from the Upper Case” on page 55
5.
Release the screw as shown.
6.
Remove the DC-DC charger board from the main board.
Removing the System Board
1.
See “Removing the Hinge Caps” on page 51
2.
See “Removing the Keyboard” on page 51
3.
See “Removing the CPU” on page 53
4.
See “Separating the Lower Case from the Upper Case” on page 55
5.
Remove the four screws on the main board as shown below.
6.
Remove the main board from the lower case with caution.