Filter
Top Products
52 Chapter 3
3. Disconnect the keyboard cable from the main board.
4. Remove the keyboard.
Removing the LCD Module
1. See “Removing the Hinge Caps” on page 51
2. See “Removing the Keyboard” on page 51
3. Remove the two screws as shown.
4. Disconnect the LED/inverter board FPC cable and the LCD FPC cable from the main board.
5. Release the two screws on the main unit.
6. Lift up the LCD module cautiously.
Removing the TouchPad Module
1. Use a flat-bladed plastic screw driver to detach the touchpad frame from the upper case.
2. Remove the left and right touchpad button and the touchpad lower button.